AutoNews

NOVITEC ROSSO RACE 848 – this name stands for an absolutely unique high-performance sports car. Only three of these automotive masterpieces will be built. The two-seater car is based on the Ferrari 599 GTB Fiorano and celebrates its world debut at the Geneva Motor Show 2010.

Underneath the striking aluminum skin that sports the unusual color combination of matte white and grey beats an extremely powerful heart: The NOVITEC ROSSO RACE 848 twelve-cylinder twin compressor engine produces 848 hp / 624 kW of power and has a peak torque of 842 Nm. Powered by this engine the car sprints from rest to 100 km/h in less than 3.4 seconds, to 300 km/h in just 23.7 seconds, and reaches a top speed in excess of 345 km/h. This exclusive special model also features an aerodynamic-enhancement kit developed in the wind tunnel, three-piece 21-inch wheels with matching sports suspension, a high-performance brake system and exclusive interior options.

The NOVITEC ROSSO RACE 848 is powered by an evolutionary stage of the tried and proven twin-compressor engine conversion for the six-liter V12 four-valve engine of the F599. For an additional power increase of 40 hp / 29.4 kW both mechanical chargers were fitted with modified turbine blades, several details of the engine peripherals were modified and the engine electronics were reprogrammed.
The high-performance chargers have an electronically limited boost pressure of 0.48 bars. The chargers are driven by a cogged belt and have their own dedicated oil circuit. A large water-to-air intercooler with dedicated water circuit also contributes greatly to the optimal power yield. A custom-developed intake manifold, high-performance injectors and sport air filter round out the engine conversion.

In addition, high-performance headers custom-designed for the compressor engine and the NOVITEC ROSSO stainless-steel quad sport exhaust system with a pipe diameter of 90 millimeters are also installed. The intensity of the exhaust note can be adjusted with a little switch on the steering wheel called the ‘manettino.’

The NOVITEC ROSSO engine management system coordinates the perfect interaction of all conversion components and ensures excellent power yield, running smoothness beyond reproach and maximum longevity.

The NOVITEC ROSSO RACE 848 specification represents a power increase over the production engine of 228 hp / 167.8 kW to 848 hp / 624 kW at 7,900 rpm. Simultaneously peak torque grows by 234 Nm to 842 Nm at 6,300 rpm.

Longer carbon-fiber NOVITEC ROSSO shift paddles make shifts of the six-speed F1-Superfast transmission even quicker and more precise. The gearbox also plays a major part in the superior performance of the car. Acceleration from rest to 100 km/h takes just 3.4 seconds, the sprint to 200 km/h a mere 9.6 seconds. With a sprint time for 0 – 300 km/h of just 23.7 seconds the NOVITEC ROSSO RACE 848 solidifies its position among the world’s fastest-sprinting sports cars. The car reaches a top speed of more than 345 km/h.

This level of performance places highest demands on well-balanced aerodynamic properties which received their finishing touches in the wind tunnel. The NOVITEC ROSSO front spoiler lip reduces lift on the front axle. The rear apron is upgraded visually and aerodynamically with a rear diffuser. The NOVITEC ROSSO rear wing further increases downforce.

The NOVITEC ROSSO rocker panels calm the airflow between front and rear wheel arches and their large air ducts optimize the supply of cooling air for the rear brakes.

The unique paint scheme sets the NOVITEC ROSSO RACE 848 even further apart from the rest: The matte-white aluminum body contrasts with grey accents such as the roof and parts of the hood to create an especially sporty appearance. Black side markers, black tail lights and third brake light as well as LED backup lights add further visual highlights.

The high-performance equipment also includes three-piece NOVITEC ROSSO NF3 wheels shod with Pirelli P Zero high-performance tires. The alloy wheels with five double spokes measure one inch diameter more than the production wheels. The front axle features size 9Jx20 wheels with size 275/30 ZR 20 tires. Size 12.5Jx21 wheels and size 355/25 ZR 21 tires on the rear axle provide excellent traction.

The king-size wheels offer space for the high-performance brake system developed in cooperation with brake specialist Brembo. The system uses the largest brake components currently approved for street use. Front and rear axle feature steel discs with a diameter of 405 millimeters and six-piston brake calipers. This system represents an optimal combination of braking power and endurance.

The height-adjustable NOVITEC ROSSO sport suspension also allows the damping rates to be set to the individual preferences of the future owners of the super sports car. The suspension’s lift function on the front axle can be activated with a push of a button in the cockpit. It raises the front of the vehicle by 40 millimeters to safely navigate such obstacles as speed bumps or parking garage ramps. Upon reaching a speed of 80 km/h the suspension automatically reverts to its original drive position.

The interior of the NOVITEC ROSSO RACE 848 offers an especially exclusive ambiance and features a limited edition plaque with the car’s serial number. The interior is built to the customer’s exact specifications and the customer can choose between a highly luxurious or a Spartan racing flair. The interior appointments include aluminum pedals and foot rest as well as the NOVITEC ROSSO leather/carbon-fiber sport steering wheel with flattened bottom for easier entering and exiting of the vehicle.

Sporty styling, a custom-tailored tire/wheel combination with diameters of 21 and 22 inches, suspension modifications, more power and exclusive interior options: NOVITEC ROSSO now also refines the new Ferrari California.

Tasteful refinements with aerodynamic benefits characterize the NOVITEC ROSSO design program for the sports car from Maranello. All aerodynamic-enhancement components are made from especially lightweight yet high-strength clear-coated carbon fiber.

The NOVITEC ROSSO front spoiler attaches to the production bumper and lends the sports car an even more striking face. Its sophisticated shape further reduces lift on the front axle for even better directional stability at high speeds.

The sides are upgraded with striking NOVITEC ROSSO rocker panel moldings for an even more clearly defined racing look. Black side markers add further individual highlights.

To reduce lift on the rear axle and thus achieve an optimal aerodynamic balance NOVITEC ROSSO equips the California with a newly designed diffuser for the rear apron and a spoiler lip on the trunk lid.

Three-piece NOVITEC ROSSO NF3 wheels also play a major role in the even more stunning appearance of the refined Ferrari. By choosing a staggered combination of size 9Jx21 wheels in front and size 11.5Jx22 on the rear axle NOVITEC ROSSO further emphasizes the wedge shape of the car. Technology partner Pirelli supplies high-performance tires custom-tailored to this Ferrari. The front axle features tires in size 255/30 ZR 21. In the rear tires in size 315/25 ZR 22 provide optimal traction.

NOVITEC ROSSO sport springs are custom-calibrated to match these ultra-low-profile tires, and lower the ride height by some 35 millimeters. At the same time the NOVITEC ROSSO specialists have developed an additional feature to further improve the everyday utility of the Ferrari California. The NOVITEC ROSSO hydraulic front lift system raises the front of the car by some 40 millimeters at the push of a button in the interior. That allows drivers to safely navigate parking garage ramps or speed bumps. At a second push of the button or automatically when reaching a speed of 80 km/h the front reverts to its original position.

Even faster throttle response and more power characterize the first NOVITEC ROSSO tuning stage for the Ferrari California, which increases power output of the 4.3-liter V8 engine by 40 hp / 29.4 kW to 500 hp / 368 kW. Simultaneously peak torque grows from 485 to 518 Nm at 5,300 rpm.

This injection of extra power comprises on the one hand a newly calibrated engine management system with custom mapping for injection and ignition, including a new higher redline speed of 8,300 rpm. The tuning package also includes the NOVITEC ROSSO stainless-steel high-performance exhaust system with metal catalysts and a flap actuator operated from the Manettino switch on the steering wheel.

NOVITEC ROSSO fulfills customer demands for interior customization with perfectly finished leather and Alcantara interiors. The choice of available colors and meticulously sewn upholstery designs is virtually unlimited.

The Ferrari 458 Italia has scooped two prestigious awards from BBC Top Gear Magazine, one of the world’s most influential automotive magazines. Not only did the British magazine nominate the 458 Italia “Supercar of the Year”, but also, for the very first time for Ferrari, the coveted title of “Car of the Year”. This brings Ferrari’s tally of consecutive Top Gear Magazine Awards to the astonishing figure of eight in seven years.

The Ferrari 458 Italia was revealed at the Frankfurt Motor Show in September to immediate critical acclaim. Following an extensive international media test drive program in Maranello, the home of the fabled Prancing Horse, the car has been the subject of enthusiastic reviews, with its handling, roadholding, ride comfort and performance all being subject to the kind of superlatives rarely seen from the world’s leading journalists.

In electing the Ferrari 458 Italiaas their “Supercar of the Year”, BBC Top Gear Magazine underlined how it has established “the new benchmark in getting from A to B as rapidly as possible.” They also described the 570-hp V8-engined berlinetta as “a game-changing car.”

When nominating the car for the overall top award as “Car of the Year”, BBC Top Gear Magazine described how it became “our winner because the scope of its abilities is absolutely breathtaking”, concluding that the Ferrari 458 Italia “isn’t just a worthy winner, it’s off the scale!”

At the Essen Motor Show, Wimmer RS will present its tuning programme for the stunning Ferrari F430 Scuderia. The famous red sports car excels as a true race ride with striking sport characteristics and dynamics, which are taken to a whole new level with the new refinement programme from Wimmer.

The tuned F430 Scuderia gets a specially developed power kit, which can be heared and felt. It is consist of new Wimmer engine control software and sport valve exhaust system with remote control. Fitted with the new power pack, the Wimmer Scuderia’s 4.3L V8 petrol engine boosts 38 hp more than the stock output of 483 hp, which corresponds for a top speed increase to 321 km/h. With this performance data, the F430 Scuderia accelerates form zero to 100 km/h in just 3.84 seconds, to 200 km/h in 11.03 seconds and hits the 300 km/h in 34.9 seconds. The refined Ferrari is also fitted with a KW HLS system (Hydraulic Lift System) that lifts up the front axle with 45 mm if needed.

The F430’s ultimate sport appeal is further strenghtened by a 19” BBS FI alloy rims wrapped in speed tyres from Dunlop in dimensions 225/35 R 19 on the front axle and 305/30 R19 on the rear one.

747 Bi-Compressor Horsepower, 738 Nm, 0 – 300 km/h in 22.9 Seconds, a Top Speed of 351 km/h and a Spectacular Color Combination

It takes its name from its rated power output of 747 horsepower: To mark the farewell of the Ferrari 430 Scuderia, NOVITEC ROSSO presents the Edizione 747. The world’s leading tuner of the super cars from Maranello turns the lightweight model into one of the most powerful super sports cars of our time. And with its matte yellow and grey paintjob it is also one of the most spectacular-looking cars of our time. At the heart of this special model lies the new NOVITEC ROSSO 747 Bi-Compressor engine that boosts power output of the V8 that normally produces 510 hp / 375 kW by 237 hp / 174 kW. Driving performance improves accordingly: With a sprint time for 0 – 100 km/h of less than 3.4 seconds, 9.4 seconds to 200 km/h and just 22.9 seconds to 300 km/h the NOVITEC ROSSO model is the most powerful and quickest Scuderia in the world. Just as impressive is the top speed of 351 km/h.

If you don’t go forward, you go backwards. The NOVITEC ROSSO specialists have developed a new evolutionary stage of the NOVITEC ROSSO Bi-Compressor version of the four-valve eight-cylinder engine to commemorate the end of the production run of the Ferrari 430 model series.

The Edizione 747 specification is the ultimate high-end version and is limited exclusively to the Berlinetta model of the Ferrari 430 Scuderia. The layout of the engine conversion corresponds to all NOVITEC ROSSO Bi-Compressor conversions for the mid-engine sports car. Each cylinder bank is fitted with an intercooler and a cogged-belt-driven high-performance supercharger with a maximum boost pressure increased for this version to 0.53 bar. The intercooling system features its own dedicated water circuit. The radiator of the system is located behind a special centrally placed air duct in the front apron.

For an optimized supply of cooling air to the engine bay the specialists have developed a special underbody with integrated air deflector. The precompressed air is routed to the combustion chambers using a custom-tailored heat-insulated intake manifold with larger cross sections. Eight high-flow injectors ensure adequate fuel supply for the compressor conversion.
The NOVITEC ROSSO engine management system perfectly synchs all high-performance components and also increases redline speed by 200 rpm.

To guarantee perfect durability even under high ambient temperatures the conversion also includes more effective radiators for water and oil.

The result of this labor is a unique symbiosis of superior power and excellent running smoothness. With a rated power output of 747 hp / 549 kW at 8,500 rpm the NOVITEC ROSSO Edizione 747 Bi-Compressor engine surpasses its naturally aspirated brethren by 237 hp / 174 kW. The increase in torque from standard 470 Nm to 738 Nm at 6,300 rpm represents an enormous plus in low-speed power.

Driving performance is in an automotive class of its own: A sprint time of less than 3.4 seconds for 0 – 100 km/h is just as unique as the sprint time of 9.4 seconds to 200 km/h. After 22.9 seconds the NOVITEC ROSSO Edizione 747 already reaches the 300-km/h mark. Upon customer request the two-seater can be equipped with longer gear ratios for a top speed of 351 km/h.

In addition the NOVITEC ROSSO Edizione 747 is also the perfect eye catcher: The two-tone special matte yellow and grey paintjob emphasizes the sporty shape of the body and lends the Scuderia pedigreed racing looks. To complement these looks NOVITEC ROSSO installs black taillights, side markers and reflectors.
The racing theme dominates also the engine’s appearance: All carbon-fiber engine components come with a matte finish.

This color scheme continues on the NOVITEC ROSSO tire/wheel combination custom-tailored for the Scuderia. The diameter of the wheels surpasses the production wheels by one inch. The three-piece 20-inch NF3 double-spoke wheels in sizes 8.5Jx20 in front and 12Jx20 on the rear axle are fitted with Michelin Pilot Cup sport tires in sizes 245/30 ZR 20 in front and 315/25 ZR 20 in back.

Another measure to achieve even more agile and direct handling is the installation of NOVITEC ROSSO sport springs, which lower the ride height of the Ferrari by some 30 millimeters.

To lend the Scuderia better suitability for everyday use despite the lowering NOVITEC ROSSO offers an innovative hydraulic lift system for the front axle. At the push of a button in the cockpit the front is raised by 40 millimeters. It allows drivers to safely navigate parking ramps, low curbs and speed bumps. After safely passing over the obstacle, another push of the button reverts the suspension to its original position. If the button is not pushed the front end reverts to its original position automatically once the car reaches a speed of 80 km/h.

NOVITEC ROSSO also adds sporty and exclusive highlights to the interior of the Edizione 747. The Supersport steering wheel features a combination of leather and carbon-fiber and offers perfect grip. Its flattened bottom also makes entering and exiting the vehicle easier. To complement the steering wheel NOVITEC ROSSO offers carbon-fiber shift paddles. They are longer than their production counterparts and make manual shifting of the F1-SuperFast2 transmission even easier.

In addition, upon customer request NOVITEC ROSSO equips the coupe with a two-tone interior perfectly matched to the exterior colors.

The Ferrari 458 Italia, that debuts today at the IAA Frankfurt Motor Show, is an 8-cylinder two-seater berlinetta with a mid-rear mounted engine, and represents a genuine break with the past in terms of Maranello’s previous high-performance sports cars. Designed to fulfil the expectations and ambitions of our most passionate clients, the 458 Italia continues the Ferrari tradition of putting the thrill into driving as a result of track-derived technological innovations.

Maranello’s racing experience can be felt not only in terms of pure technological transfer but also on a more emotional level, because of the strong emphasis on creating an almost symbiotic relationship between driver and car. This is one of the areas where Michael Schumacher’s contribution, right from the early stages of the project, was of fundamental importance.

Thanks to a new 4,499 cc V8 engine, which punches out 570 CV, the F1 dual-clutch gearbox and a 1,380 kg dry weight, the 458 Italia boasts an extraordinary weightpower ratio of 2.42 kg (a power-weight ratio of 413 CV per ton). This means it sprints from 0 to 100 km/h in under 3.4 seconds and hits a maximum speed of over 325 km/h.

The 458 Italia delivers superb vehicle dynamics with an ideal weight balance for a midrear engined sports car – 58 per cent rear, 42 per cent front. Evolved electronic control systems also help guarantee maximum performance in all driving conditions. Its new suspension set-up, featuring twin wishbones with L arms at the front and a multilink set-up the rear, is tuned for ultimate road-holding and superlative handling. This, together with a more direct steering ratio, ensures the car is extremely responsive whilst maintaining superior ride comfort.

As is the case with the Scuderia’s Formula 1 single-seaters, the engineers focused their efforts on achieving maximum efficiency right across the board with this car. The result is that the Ferrari 458 Italia produces only 307 g/km of CO2 and has a fuel consumption of just 13.3 l/100 km (combined cycle), a benchmark for the entire segment.

Aside from the work done to reduce both internal friction in the engine and overall weight, this result has been achieved thanks to aerodynamic research which focused on cutting drag and maximising downforce.

The 458 Italia is thus a synthesis of technological innovation, creative flair, style and passion, a combination of characteristics for which Italy as a nation is renowned. Ferrari’s Chairman, Luca di Montezemolo, chose to pay homage to this fact by adding the name of the car’s homeland to the traditional figure representing the displacement and number of cylinders.

Styling and aerodynamics

Every Ferrari is the result of an uncompromising design approach that integrates styling and aerodynamic requirements. The Pininfarina design features compact, aerodynamic lines, underscoring the concepts of performance-oriented efficiency that inspired the project.

The nose features a single opening for the front grille and side air intakes, with aerodynamic sections and profiles designed to direct air to the coolant radiators and the new flat underbody. The nose also sports small aeroelastic winglets which generate downforce and, as speed rises, deform to reduce the section of the radiator intake and cut drag.

The oil radiators for the F1 gearbox and the dual-clutch are situated in the tail and air is fed from two intakes on the top of the rear wings. This solution provides a base bleed effect, an aerodynamic function that was developed by Ferrari for the FXX and which reduces drag by feeding the hot air out of the radiators under the nolder and into the slip stream. Using experience gained in aerodynamic development on the Ferrari F430 GT2, the flat underbody now incorporates the air intakes for engine bay cooling. These are positioned ahead of the rear wheelarches where they use pressure differences to efficiently channel air flow to the engine bay, at the same time generating more rear downforce.

The car’s sills are characterised by two keel forms that act as fairings to the rear wheels, while the rear bodywork between the rear diffusers acts as the surround to the novel triple exhaust tail pipes, a styling cue that recalls the legendary F40 and gives the 458 Italia’s tail an aggressive sporty stance. The engine, in mid-rear V8 Ferrari tradition, is visible below the engine cover.

Technical development of the car’s shape started using CFD (Computational Fluid- Dynamic) techniques which helped optimise the management and interaction of the internal flows prior to wind tunnel testing. The latter was carried out on Ferrari’s rolling road facility using modular 1:3 scale models. The final solution chosen ensured adequate cooling to the running gear, while, at the same time, achieving a high level of aerodynamic efficiency (1.09) through excellent drag and downforce figures (Cd 0.33 and Cl 0.36 respectively) with 140 kg of downforce at 200 km/h and no less than 360 kg at top speed.

The front-mounted coolant radiators are trapezoidal in shape and positioned to minimise the impact of the internal cooling flows on drag and downforce. The oil radiators for the gearbox and clutch are are situated in the tail with air fed from two intakes on the top of the rear wings. The hot air from the radiators creates a base bleed effect, venting into the car’s low-pressure trail below the nolder and reducing drag.

The air intakes for engine bay cooling are situated on the aerodynamic underbody, where differences in pressure channel the air in the most efficient manner, and are positioned to increase rear downforce. Similarly air is channelled from the front air dam to the rear diffuser where the position and number of the fences has been developed to optimise the distribution of the vortex to improve rear downforce.

Engine

The engine is a dry-sump 90 degree V8 with a displacement of 4499 cc and is mid-rear mounted. It is an entirely new design engineered to reach a maximum of 9,000 rpm – a first on a road car – with a high 12.5:1 compression ratio and maximum power output of 570 CV. This equates to an outstanding power output of 127 CV/litre, a new benchmark for a naturally-aspirated production engine.

The generous torque available – 540 Nm at 6000 rpm, with over 80 per cent available from 3250 rpm – ensures rapid pick-up from all revs. The specific torque output of 120 Nm/l is another record.

The design of the engine components has been influenced by the carry-over of racing technology – F1 in particular – for maximum fluid-dynamic efficiency in order to achieve both performance and fuel consumption objectives, and meet the most stringent international emissions restrictions. The piston compression height was reduced as per racing engine practice. Similarly, thinner compression rings have been adopted to minimise friction between piston and liner. A graphite coating was applied to the piston skirt for the same reason.

To help further reduce internal friction, the cylinder block has four scavenge pumps. Two pick up oil from the cylinder heads and front and rear of the engine via dedicated oil recovery ducts outside the crankcase area, and two pick up oil from below the crank throws. The recovery ducts of the latter are interconnected in two groups of four cylinders to optimise the scavenge function and create a strong vacuum (800 mbar) around the crankshaft. This solution prevents excess oil splashing out of the sump and onto the rotating crankshaft and thus reduces power loss caused by friction. It also reduces losses due to windage caused by the pumping action of the pistons.

The engine oil pressure pump features variable displacement geometry which reduces the amount of power absorbed at high revs. Lowering the pump’s displacement actually increases the power available at the crankshaft for the same amount of fuel used.

As is traditional for Ferrari engines, the new V8 is equipped with continuously variable timing on both inlet and exhaust cams. The aluminium intake manifold has been lightened by reducing the wall thickness. It has short, almost straight inlet tracts to reduce losses and a system that varies the geometry of the manifold, optimising the volumetric efficiency throughout the rev range. This is achieved by incorporating three pneumatic throttle valves in the central section between the two plenums. The engine mapping provides four different configurations of the valves for optimum torque values at all revs.

The use of GDI with Split Injection improves engine performance by modulating the injection in two phases, increasing combustion efficiency and the torque at low revs (by up to 5 per cent). A high injection pressure (200 bar) guarantees adequate pulverisation of the petrol and an optimal air/fuel mix right up to 9000 rpm. This feature again results in better performance and lower fuel consumption.

The exhaust system was designed to provide the kind of thrilling soundtrack owners of Ferrari’s V8s are used to whilst also guaranteeing high levels of acoustic comfort. One of the main objectives with the exhaust was to reduce weight. The catalytic converter is attached to the central section of the exhaust by a flexible element to reduce the amount of vibration transmitted and to thus allow thinner metal to be used. Similarly the pre-catalytic converter has been eliminated, lowering overall weight and reducing back pressure whilst still respecting strict Euro 5 and LEV2 emissions.

Dual-clutch F1 gearbox

One of the important novelties on the 458 Italia is the introduction of the 7-speed F1 dual-clutch gearbox which guarantees faster yet smoother changes. The technology is based on the independent management of even and odd gears which are pre-selected using two separate input shafts. The gear shifting time (the overlap between the opening and closing phases of the two clutches) is zero and thus there is no interruption of engine torque to the driven wheels. Compared to the California gearbox, response times have been reduced and the 458 Italia has specific, sportier gear ratios to match the power and torque curves of the new V8, guaranteeing high torque even at lower revs. The E-Diff 3 electronic differential has also been integrated into the gearbox, resulting in a more compact and lighter unit.

Chassis

The modular chassis is an all-new design. New alloys join the traditional aluminium, along with high-resistance aluminium extrusions, developed by the aviation industry, and innovative manufacturing processes, such as heat-forming. The aim was to keep weight down to the benefit of performance and handling. The result is a chassis with improved structural rigidity, with torsional rigidity up 15 per cent compared to the F430, and beam stiffness up 5 per cent.

Suspension

The 458 Italia’s front suspension employs a novel new double wishbone set-up which features an L-shape design for the lower wishbone, with the rearward facing arm longer than the one in line with the wheel axis to provide greater longitudinal flexibility. This in turn improves the car’s ability to absorb bumps and it also reduces suspension noise. Another benefit is in terms of greater transverse rigidity which improves handling. The same characteristics are shared by the new rear multi-link suspension and, combined with specific tyre development, overall vertical rigidity has thus been improved (+35 per cent with respect to the F430) for less body roll, and the engineers were able to introduce a more direct steering ratio (11.9° compared to the F430’s 16.9°, a reduction of 30 per cent) which makes for quicker and more responsive steering on both road and track.

The 458 Italia also features the latest, second-generation Magnetorheological Suspension Control shock absorber system. Compared to the system first introduced on the 599 GTB Fiorano, SCM2 boasts an evolved ECU (-50 per cent input time) and a damper force generation time of 8 ms compared to the 599’s 15 ms. There is also a new piston rod bushing in the damper which reduces internal friction (-35 per cent) for more precise small-bump control and improved ride comfort.

Vehicle dynamics and electronics

On the 458 Italia the E-Diff and F1-Trac control software are integrated in the same ECU. This minimises communication times between the two systems and, at the same time, the individual logics were evolved to improve vehicle performance.

A new Power On strategy has been developed for the E-DIff governing traction out of corners and is integrated with the F1-Trac logic, an evolution in the combined action of both systems which is also connected with the high-performance ABS control logic, which is specially set up for high-grip surfaces.

The electronic differential continuously distributes torque to the rear wheels, both in Power Off (turning in for the corner) and Power On (accelerating out of the corner), guaranteeing excellent vehicle stability and control in all driving conditions and on all surfaces. The E-Diff 3 now works in a more integrated manner with the F1-Trac, using a series of F1-Trac parameters and evaluations (such as estimates of grip) both in manettino positions in which the F1-Trac is inserted (Sport – Race) and those in which it is deactivated (CT Off and CST Off). Compared to previous versions, E-Diff 3 delivers improved torque distribution coming out of corners (in Sport, Race, CT Off and CST Off), which translates into improved grip, better roadholding and more progressive handling on the limit. The result is an improvement of 32 percent in longitudinal acceleration out of corners compared to previous models and a lap time at Fiorano of just 1′ 25” seconds.

High-performance ABS

Since the beginning of 2008 Brembo carbon-ceramic brakes have been standard on all Ferraris. The 458 Italia is no different and is equipped with 6-pot aluminium callipers with 398 x 223 x 36 mm discs at the front, and 4-pot aluminium callipers with 360 x 233 x 32 mm discs at the rear.

The 458 Italia boasts outstanding braking distances (100-0 km/h in 32.5 metres; 200-0 km/h in 128 metres) thanks to the development and optimisation of the Bosch control logic and the evolution of Ferrari’s Pre-Fill logic, which reduces response times by activating the pistons in the callipers, thus minimising the gap between the brake pad and the disc as soon as the driver lifts off the accelerator. Similarly, these excellent results were achieved thanks to a specific calibration of the ABS for medium/high grip surfaces, and by integrating the ABS control logic with that of the E-Diff 3 to ensure a more accurate estimate of the vehicle speed and hence better braking torque control, as well as enhanced vehicle stability.

Interior design

The Ferrari Styling Centre set out to re-interpret Ferrari’s traditional sports car interior themes in an innovative and functional way. The interior reflects the design rigour of the exterior of the car, with clean, uncluttered forms that highlight the new driver-oriented cockpit inspired by the racing world.

Radically new and intuitive ergonomics see the driver set in the centre of a simple, streamlined lay-out. The upper and lower surfaces of the dashboard are trimmed in leather while the instrument binnacle sits atop an aluminium insert that forms a single, structural element housing the satellite pods and secondary commands. The original shape of the air vents was inspired by the design of Formula 1 exhaust chimneys in use up until a few years ago.

The slim and minimalist centre console features a sculpted aluminium casting which houses the F1 panel. This panel includes the Launch Control along with the secondary gearbox controls for reverse and auto settings. There is also a leather-trimmed ergonomic wrist support for actioning the F1 panel buttons and the electric window lifts. The console also includes two Alcantara-trimmed storage trays for small oddments.

The door panel is fitted with side airbags and its simple sleek lines are enhanced by the fact that the demisting vents for the side windows are now positioned on the corners of the dash. There is additional oddments storage space in the soft leather pocket at the bottom of the door.

Driver-car interface

Working closely with the Ferrari Styling Centre, the engineers have reinterpreted the positioning of the major commands to provide a truly driver-oriented cockpit. All main controls are now located directly on the steering wheel, while secondary functions are set in two satellite pods either side of the dash and the panel ahead of the driver includes comprehensive instrument displays. These solutions represent an important safety aspect, enabling the driver to concentrate fully on driving. Similarly this layout ensures maximum control of the car in high-performance driving, an uncompromising approach that derives directly from Ferrari’s F1 experience.

Steering wheel and dash

In a radical move that emphasises the vicinity of Ferrari’s road cars to its F1 cars, the steering-column mounted stalks have been eliminated and all the major commands are now on the steering wheel for maximum vehicle control at all times.

The 458 Italia is equipped with a Racing manettino switch which is biased towards more sporting set-ups, giving the driver a wider selection of track-oriented electronic control parameters. In fact the F430’s ICE setting has been dropped in favour of CT Off which de-activates the traction control while maintaining the stability control.

The right-hand satellite pod on the dash incorporates controls for the infotainment, while the one on the left controls the Vehicle Dynamic Assistance display on the lefthand TFT screen. The Vehicle Dynamic Assistance monitors the operating parameters of the most important areas of the car – engine/gearbox, tyres and brakes. The VDA is enabled in the following manettino settings – Race, CT Off and CST Off – and provides visual confirmation of the status of each component based on an algorithm from parameters reading lateral and longitudinal acceleration, revs and speed. This enables the driver to assess the ideal operating conditions for the car. There are three status settings: WARM-UP (operating temperature too low), GO (ideal operating conditions) and OVER (one or more components are no longer at their optimum level and need cooling).

Carrozzeria Scaglietti Personalisation Programme

The Carrozzeria Scaglietti Programme allows Ferrari clients to personalise their car to suit their own tastes and requirements. As with the rest of the range, there are four main personalisation areas dedicated the 458 Italia: Racing and Track, Exterior and Colours, Interior and Materials, Equipment and Travel.

The car’s sporting character can be further underlined by fitting the optional diamond finish forged alloy wheels or the Racing Superleggero (super lightweight) seats in carbon-fibre. Naturally, there is a virtually infinite number of trim combinations available for the interior, with a choice between leather, carbon-fibre and Alcantara.

Samples of colours and materials as well as virtual configuration tools are available to clients at every Ferrari showroom to help them choose their specifications. They may also request out-of-range colours and content to ensure their 458 Italia is truly unique.

No Doubt, Ferrari Enzo is one of the world’s most exclusive cars, with its 6.0 litre 12 cylinder mid-engine berlinetta capable of prodicing 660 horsepower and passionate Maranello racing design, this high-performance sports car is ready to put the thrill into driving.

Imagine, Ferrari Enzo boosted to 840 horsepower and 100 kilograms (220 lb) lighter. Well…. we don’t need to imagine no more, it’s here – edo competition Enzo XX Evolution.

A bump in displacement from 6.0 to 6.3 liters, new camshafts, new titanium valve spring retainers and connecting rods, modified cylinder heads, new high performance exhaust headers, high flow catalytic converters, mufflers and air filters: that’s the scope of edo competition’s engine modifications. The standard hydraulic tappets are replaced with newly developed solid tappets, enabling the 12 cylinder engine to rev to an incredible 9,600 rpm. This is unmatched by any other 12 cylinder engine at this time! Additionally the intake system of the V12 was modified, a new high performance clutch – available with „strada“ or „pista“ friction pads – and a more powerful oil pump were installed. The power output is increased by 180 to 840 horsepower. Without mufflers more than 860 horsepower is possible. The maximum torque of 780 Nm (575 ft-lb) is available at 5,800 rpm.

Thanks to the performance upgrade and the additional weight decrease (100 kilograms), the edo Enzo XX Evolution accelerates from zero to 100 km/h (62 mph) in just 3.2 seconds, 200 km/h (124 mph) in 9.0 seconds and 300 km/h in just 19 seconds. The top speed exceeds 390 km/h (242 mph).

For a proper sound, edo specialists has mounted a stainless steel muffler featuring remote-controlled butterfly valves, which allows the driver to switch between two different sound levels. The transmission shift times are now reduced to an incredible 60 milliseconds and an edo/KW race suspension is installed for the Enzo XX Evolution. A tire pressure monitoring system displays the pressures for the 19-inch front wheels and the 20-inch rear wheels with 335 mm wide tires.

The edo aerodynamics pack is consist of complete exhaust system with tips machined from billet aluminum, now relocated to the top of the body. The tips are plasma-coated using a special process. The newly developed rear skirt featuring winglets and a rear wing profile, adjustable in 3 steps, improves the ground effect and can be tuned to the tastes of the driver. The new retractable rear wing is upgraded with a taller flap resulting in increased downforce and stability, especially at high speeds. New LED tail lights round off the rear view of the car.

An Extra 40 hp, Striking Design and Exclusive Accessories

The Ferrari 599 GTB is the focus of the latest new product developments from NOVITEC ROSSO, the worldwide leader in customizing the great cars from Maranello. The new developments include a performance kit that increases power output of the V12 engine by 40 hp / 29.4 kW, a striking and aerodynamically efficient design program and numerous exclusive accessories.

In addition to the familiar twin compressor engines with up to 808 hp / 594 kW NOVITEC ROSSO now also offers classic engine tuning for the six-liter twelve-cylinder four-valve engine. The Performance Stage 3, starting at 10,490 Euros, increases power output from standard 620 hp / 456.3 kW to 660 hp / 485.7 kW without any alterations to the engine’s inner workings.

The conversion consists of new engine electronics and a complete NOVITEC ROSSO stainless-steel high-performance exhaust system. The new engine management system comprises new mapping for ignition and injection as well as increase in maximum engine speed to 8,550 rpm.

The NOVITEC ROSSO sport exhaust system features four tailpipes with diameters of 90 millimeters and is available in two different versions. In addition to a conventional version there is also a system with controllable exhaust flap. Using the little ‘Manettino’ switch on the steering wheel, the driver can change the exhaust note from sporty subdued to bona fide racing sound.

After the conversion throttle response of the V12 engine is even crisper with further improved driving performance. The higher redline speed increases top speed by five km/h to 335 km/h.

For even faster and more precise shifting of the six speeds of the 599 GTB’s F1-Superfast transmission NOVITEC ROSSO offers longer carbon-fiber shift paddles.

Even better looks and better aerodynamic efficiency: These are the attributes of the NOVITEC ROSSO body components, which received their finishing touches in the wind tunnel. The front spoiler lip for the production bumper gives the 599 GTB an even more aggressive expression and reduces lift on the front axle. For a perfect aerodynamic balance the rear of the car is upgraded by NOVITEC ROSSO with a new rear wing and diffuser.

New rocker panels with large air dams give the coupe a more muscular stance.
All NOVITEC ROSSO aerodynamic components are also available in clear-coated carbon fiber.

Further innovative NOVITEC ROSSO exterior accessories are black taillights, side markers and auxiliary brake light as well as the new LED rear fog lights.

Three-piece NOVITEC ROSSO NF3 wheels are important components in the spectacular appearance of the customized 599 GTB. They are available in a number of different color combinations. The double-spoke wheels exceed the size of the production wheels by one inch on front and rear axle, and are fitted with Pirelli high-performance tires. The front axle features size 9Jx20 wheels with size 275/30 ZR 20 tires. On the rear axle size 12.5Jx21 wheels with tires in size 355/25 ZR 21 make full use of the available space under the wheel arches.

The NOVITEC ROSSO sport suspension allows both ride height and damper rates to be set according to each customer’s individual preferences. But that’s not all: By pushing a button in the cockpit the front of the car can be raised by 40 millimeters to safely navigate parking-garage ramps or speed bumps. Upon reaching a speed of 80 km/h the front of the car automatically reverts to its original position.

NOVITEC ROSSO offers a multitude of individual options for the interior of the two-seater sports car. The product lineup includes a leather/carbon-fiber sport steering wheel with flattened bottom for easier entering and exiting of the vehicle, aluminum foot pedals and foot rest. Additional customization requests can be fulfilled with custom-altered seats tailored to the individual owner and with leather and Alcantara interiors perfect down to the last detail.

2009 EDO Competition Ferrari Enzo XX Specifications

Engine V12 cylinder 6.3 ltr.
Power est. 800 hp/(588 kW) / 8.500/min
Max. torque est. 780 Nm / 5.800/min

Performance

Top speed > 380 km/h
0 – 100 km/h (0 – 62 mph) est. 3.2s
0 – 200 km/h (0 – 124 mph) est. 9.0s
0 – 300 km/h (0 – 186 mph) est. 19.0s

edo Tuning Program Enzo XX

Power increase 170 hp – contains new steel cylinder and piston 6.3 l (same like FXX ), new camshafts, new Titan valve springs, new Titan connecting rods, new oil cooling piston pipes, new exhaust manifolds, sport catalytic stainless, sport catalytic converter, sport air filter, air-ram system, fuel cooling system, new clutch, all bearings new, new oil pump, new gaskets, and dyno running with all work
Sport catalytic converter stainless with two level switch controlled sound system, new tail pipes in carbon. Volume of the exhaust per button push adjustable
Ceramic sports break system with 396 mm brake disc front and 360 mm brake disc rear, special brake pads in front and rear
Wheels can be painted in different designs
Tyre-air-pressure control system shows pressure and temperature per wheel
Design modification outside for example complete different colour
Independently adjustable dumping technology – rebound and compression dumping like FIA – GT MC12
Air-in-take from carbon
Weight reducing program 100 kg!!
New Racing wheels front 10 x 19 with 265/35 ZR 19 Michelin, rear 13 x 20 with 335/30 ZR 20 Michelin

The 458 Italia is the latest incarnation of the mid-rear engined berlinetta and will be unveiled at the next Frankfurt Motor Show

Maranello, July 28th 2009 – While it’s true that every Ferrari is innovative by definition, it’s equally true that in the course of the Prancing Horse’s history, certain cars have marked a genuine departure from the current range. This is very much the case with the Ferrari 458 Italia, which is a massive leap forward from the company’s previous mid-rear engined sports cars.

The new model is a synthesis of style, creative flair, passion and cutting-edge technology, characteristics for which Italy as a nation is well-known. For this reason Ferrari chose to add the name of its homeland to the traditional figure representing the displacement and number of cylinders.

The Ferrari 458 Italia is a completely new car from every point of view: engine, design, aerodynamics, handling, instrumentation and ergonomics, just to name a few.

A two-seater berlinetta, the Ferrari 458 Italia, as is now traditional for all Ferrari’s road-going cars, benefits hugely from the company’s Formula 1 experience. This is particularly evident in the speed and precision with which the car responds to driver inputs and in the attention focused on reducing internal friction in the engine for lower fuel consumption than the F430, despite the fact that both overall displacement and power have increased. However, Ferrari’s track experience makes its presence felt in the 458 Italia not only in terms of pure technological transfer but also on a more emotional level, because of the strong emphasis on creating an almost symbiotic relationship between driver and car. The 458 Italia features an innovative driving environment with a new kind of steering wheel and dashboard that is the direct result of racing practice. Once again input from Michael Schumacher – who was involved from the very start of the 458 Italia project – played an invaluable part.

The Ferrari 458 Italia’s Pininfarina design provides further evidence of the complete departure from the past that this new car hails. The Ferrari 458 Italia has a compact, aerodynamic shape, underscoring the concepts of simplicity, efficiency and lightness that inspired the project. As with every Ferrari, the car’s styling has been very heavily influenced by the requirements for aerodynamic efficiency, as can be seen from the downforce of 140 kg at 200km/h generated by the new model. The front features a single opening for the front grille and side air intakes, with aerodynamic sections and profiles designed to direct air to the coolant radiators and the new flat underbody. The nose also sports small aeroelastic winglets which generate downforce and, as speed rises, deform to reduce the section of the radiator inlets and cut drag.

The new 4499 cc V8 is the first Ferrari direct injection engine to be mid-rear mounted. It has a very low piston compression height typical of racing engines which contributed to achieving its compression ratio of 12.5:1. Equipped with the traditional flat-plane crankshaft, the engine delivers 570 CV at 9000 rpm and, with an outstanding power output of 127 CV/litre, sets a new benchmark not only for the whole Ferrari range and the history of company, but also for the entire market segment. Maximum torque is 540 Nm at 6000 rpm, over 80 per cent of which is available from 3250 rpm. Specific torque is a record 120 Nm/litre. However, what is truly extraordinary is the amount of torque available while still maintaining high levels of power at low revs.

The car’s soundtrack is also typical Ferrari, with an exciting, powerful growl emerging from the engine before it channels through to the exhaust’s three rear tailpipes.

The 458 Italia is equipped with the seven-speed dual-clutch transmission which increases performance whilst providing very smooth shifts even at full throttle. The engineers have developed specific, sportier gear ratios to match the power and torque curves of the new V8, guaranteeing high torque even at lower engine speeds and allowing the car to reach its maximum speed in top gear.

This new Ferrari is also a major leap forward when it comes to cutting emissions. Despite the fact that the new engine is significantly more powerful than the V8s that preceded it, the Ferrari 458 Italia produces just 320 g/km of CO2 and fuel consumption is 13.7 l/100 km (combined cycle), the best in the entire segment.

The engineers also focused on weight reduction during the design phase for similar reasons. Consequently, the Ferrari 458 Italia has a dry weight of 1380 kg with a power-to-weight ratio of 2.42 kg/CV. Weight distribution is also optimal with 58 per cent over the rear axle. The result of the engineers’ endeavours can be summed up in to two simple statistics which together perfectly encapsulate the Ferrari 458 Italia’s exceptional performance: 0-100 km/h acceleration in under 3.4 seconds and a maximum speed in excess of 325 km/h.

For the new chassis, once more in aluminium, Maranello’s engineers incorporated various types of advanced alloys along with aerospace industry-derived manufacturing and bonding techniques.

With regard to vehicle dynamics, the Ferrari 458 Italia’s suspension features twin wishbones at the front and a multi-link set-up at the rear tuned for maximum roadholding and superlative handling. Along with a more direct steering ratio, the 458 Italia thus offers extremely rapid turn-in and body control whilst maintaining superior ride comfort.

The integration of the E-Diff and F1-Trac (now controlled by the same ECU) and their respective mappings is even greater, resulting in a 32 per cent increase in longitudinal acceleration out of corners compared to previous models. The evolution of the control logic, with even faster and more accurate calculation of levels of grip, ensures even greater roadholding, better handling and ease of control on the limit.

The same ECU also governs the high-performance ABS, providing even more precise control over the logic threshold and greater efficiency. The brakes also feature a prefill function whereby the pistons in the callipers move the pads into contact with the discs on lift off to minimise delay in the brakes being applied. This combined with the ABS has cut the 100-0 km/h braking distance to a mere 32.5 metres.

The Ferrari 458 Italia’s interior is another area of the car that exalts its sporty personality. The driver is welcomed by a new layout and a revolutionary ergonomic interface where the main controls are all clustered on the steering wheel.

With the Ferrari 458 Italia, Maranello has brought a highly distinctive new car to its 8-cylinder range. The company now offers two models that share a common, race-derived DNA, both exceptionally sporty and fun to drive in true Ferrari tradition, but aimed at two very different kinds of client. While the Ferrari California was created for owners requiring a more versatile sports car with a practical edge, the 458 Italia is designed for owners for whom the priority is uncompromising on-road performance with occasional track day capability, but who still demand a car that is useable in day-to-day driving like all Ferrari’s recent models.