AutoNews

Lotus unveiled the 2011 Lotus Exos T125 Track Car at the Monterey Motorsports Pre-Reunion. The Lotus Exos T125 uses a 3.5-liter Cosworth V8 engine that produces 650 bhp (485 kW / 659 PS) with a 10,300 rpm redline. Lotus Exos T125 is also light as a feather, weighing just 650kg. After some simple math, you’ll see the car has a 1000 hp per ton power-to-weight ratio. The weight is kept to a minimum thanks to a carbon fiber monocoque, carbon fiber suspension and carbon ceramic brakes.

The estimated Lotus Exos T125 price will be around 1 million USD. And only 25 will build.

Roger Becker, former Director of Vehicle Engineering for Lotus is celebrated with a series of special edition versions of the final run of European specification 1.8 litre Elise and Exige sportscars.

In celebration of his now legendary input over the years, Roger Becker (RGB) who retired in January following 44 years of service, will have a series of Lotus Elise and Lotus Exige sports cars in bespoke RGB Special Edition specification produced and set for release from September 2010.

The Elise SC and Exige S RGB Special Editions will both be specified to a high level with Sports and Touring packs as standard. The Elise SC RGB Special Edition has a supercharged 217 hp (220 ps) 1.8 litre engine which blesses it with a 0-60 mph time of 4.3 seconds (0-100kmh in 4.6 seconds). The Lotus Exige S RGB Special Edition uses the range topping 257 (260 ps) supercharged and intercooled 1.8 litre engine which endows it with a 0-60 mph in around 4 seconds and a phenomenal aerodynamic downforce figure of 92.5 lbs (42 kg) at 100 mph (160 kmh).

Roger Becker said, “I am honoured that Lotus has named these two special editions after me, especially as it allows me to offer the customer my favourite specifications. The past 44 years have been an incredible journey and I’m looking forward to watching Lotus progress in the future, I have no doubt that the company will continue to go from strength to strength.”

Both the Elise SC and the Exige S RGB Special Editions are available in four colours, Aspen White, Starlight Black, Solar Yellow & Carbon Grey and each one is identified by a numbered interior plaque, Roger Becker’s signature on the side of the bodywork and special monochrome Lotus nose badge.

At the end of 2010, production of the European versions of the Elise R and SC and the Exige S and Cup 260, which use the 1.8 litre 2ZZ VVTL-i engines supplied by Toyota, will finish due to changes in legislation and the introduction of “Euro 5” Type Approval which does not apply to these cars. Production of the Elise R and SC and the Exige S and Cup 260 will, however, continue for all other markets.

Andreas Prillmann, Chief Commercial Officer for Lotus Cars said, “I would like to thank Roger for his dedication to Lotus It’s fitting that an exclusive number of the last of the 1.8 litre Elises and Exiges for Europe are dedicated to Roger, who has been instrumental in the development of so many Lotus cars over the years, in particularly the Evora, the Exige and the recent versions of the Elise. Not only has his extensive knowledge and learning been passed on to our team of talented and skilled engineers, but also his passion for the Lotus brand and heritage has helped Lotus grow into the world class organisation that it is today.”

The new, super efficient 2011 Model Year Lotus Elise, introduced to the market earlier this year, will continue for all markets where it is sold including Europe.

The Lotus Elise SC RGB Special Edition in more detail

- 217 hp (220 ps) supercharged 1.8 litre engine
- Lotus ultra lightweight forged alloy wheels
- Sport pack
- Touring pack
- Four paint colours – Aspen White, Starlight Black, Solar Yellow & Carbon Grey
- Roger Becker signature on rear of the car
- Roger Becker numbered plaque
- Monochrome Lotus badges
- Air conditioning
- Recommended Retail Price:
o UK: £38,550 (including VAT)
o Euro Zone: € 43,655 (excluding regional taxes)
o Switzerland: CHF 71,435 (excluding taxes)
Official European Combined Cycle = 8.5 litres / 100 km (33.2 mpg)
Official European Extra Urban Cycle = 6.4 litres/100 km (44.1 mpg)
Official European Urban Cycle = 11.8 litre/100 km (23.9 mpg)
199 g/km of CO2

The Lotus Exige S RGB Special Edition in more detail

- Standard Features
- 257 hp (260 ps) Supercharged 2ZZ 1.8 engine
- Lotus ultra lightweight forged alloy wheels
- Performance pack
- Sport pack
- Touring pack
- Four paint colours – Aspen White, Starlight Black, Solar Yellow & Carbon Grey
- Roger Becker signature on rear of car
- Roger Becker numbered plaque
- Monochrome Lotus badges
- Structural shear panel which gives increases lateral stiffness to the rear subframe by 30%
- Air conditioning
- Recommended Retail Price:
o UK: £41,950 (including VAT)
o Euro Zone: € 50,042 (excluding regional taxes)
o Switzerland: CHF 81,887 (excluding taxes)
Official European Combined Cycle = 8.5 litres / 100 km (33.2 mpg)
Official European Extra Urban Cycle = 6.5 litres/100 km (43.5 mpg)
Official European Urban Cycle = 11.9 litre/100 km (23.7 mpg)
199 g/km of CO2

Lotus Engineering has conducted a study to develop a commercially viable mass reduction strategy for mainstream passenger vehicles. This study, released by the International Council on Clean Transportation, focused on the use of lightweight materials and efficient design and demonstrated substantial mass savings. When compared with a benchmark Toyota Venza crossover utility vehicle, a 38% reduction in vehicle mass, excluding powertrain, can be achieved for only a 3% increase in component costs using engineering techniques and technologies viable for mainstream production programmes by 2020. The 2020 vehicle architecture utilises a mix of stronger and lighter weight materials, a high degree of component integration and advanced joining and assembly methodologies.

Based on U.S. Department of Energy estimates, a total vehicle mass reduction of 33% including powertrain, as demonstrated on the 2020 passenger car model, results in a 23% reduction in fuel consumption. This study highlights how automotive manufacturers can adopt the Lotus philosophy of performance through light weight.

Dr Robert Hentschel, Director of Lotus Engineering said: “Lighter vehicles are cleaner and more efficient. That philosophy has always been core to Lotus’ approach to vehicle engineering and is now more relevant than ever. Lightweight Architectures and Efficient Performance are just two of our core competencies and we are delighted to have completed this study with input from the National Highway Traffic Safety Administration and the U.S. Environmental Protection Agency to provide direction for future CO2 reductions. We believe that this approach will be commonplace in the industry for the future design of vehicles.”

The study investigated scenarios for two distinct vehicle architectures appropriate for production in 2017 and 2020. The near-term scenario is based on applying industry leading mass reducing technologies, improved materials and component integration and would be assembled using existing facilities. The mass reduction for this nearer term vehicle, excluding powertrain, is 21% with an estimated cost saving of 2%.

A benchmark Toyota Venza was disassembled, analysed and weighed to develop a bill of materials and understand component masses. In developing the two low mass concepts, Lotus Engineering employed a total vehicle mass reduction strategy utilising efficient design, component integration, materials selection, manufacturing and assembly. All key interior and exterior dimensions and volumes were retained for both models and the vehicles were packaged to accommodate key safety and structural dimensional and quality targets. The new vehicles retain the vision, sight line, comfort and occupant package of the benchmarked Toyota Venza.

Darren Somerset, Chief Executive Officer of Lotus Engineering Incorporated, Lotus’ North American engineering division which led the study, said “A highly efficient total vehicle system level architecture was achieved by developing well integrated sub-systems and components, innovative use of materials and process and the application of advanced analytical techniques. Lotus Engineering is at the forefront of the automotive industry’s drive for the reduction in CO2 and other greenhouse gas emissions and this study showcases Lotus Engineering’s expertise and outlines a clear roadmap to cost effective mass efficient vehicle technologies.”

Mass and Cost Summary

Base Toyota Venza
excluding powertrain Lotus Engineering Design
System Weight
(kg) 2020 Venza 2017 Venza
% Mass Reduction % Cost Factor % Mass Reduction % Cost Factor
Body 383 42% 135% 15% 98%
Closures/Fenders 143 41% 76% 25% 102%
Bumpers 18.0 11% 103% 11% 103%
Thermal 9.25 0% 100% 0% 100%
Electrical 23.6 36% 96% 29% 95%
Interior 252 39% 96% 27% 97%
Lighting 9.90 0% 100% 0% 100%
Suspension/Chassis 379 43% 95% 26% 100%
Glazing 43.7 0% 100% 0% 100%
Misc. 30.1 24% 99% 24% 99%
Totals 1290 38% 103% 21% 98%

The 2020 Passenger Car Technical Detail
Body
The body includes the floor and underbody, dash panel assembly, front structure, body sides and roof assembly. The baseline Toyota Venza body-in-white contained over 400 parts and the revised 2020 model reduced that part count to 211. The body-in-white materials used in the baseline Venza were 100% steel, while the 2020 model used 37% aluminium, 30% magnesium, 21% composites and 7% high strength steel. This reduces the structure mass by 42% from 382 kg to 221 kg.

The low mass 2020 body-in-white would be constructed using a low energy joining process proven on high speed trains; this process is already used on some low volume automotive applications. This low energy, low heat friction stir welding process would be used in combination with adhesive bonding, a technique already proven on Lotus production sports cars. In this instance, the robotically controlled welding and adhesive bonding process would be combined with programmable robotic fixturing, a versatile process which can be used to construct small and large vehicles using the same equipment.

Closures/Fenders

The closures include all hinged exterior elements, for example, the front and rear doors and the rear liftgate. One alternative approach included fixing the primary boot section to improve the structure, reduce masses and limit exposure to high voltage systems. A lightweight access door was provided for checking and replacing fluids.

The closures on the baseline Toyota Venza were made up of 100% steel. The low mass Venza closures/fenders would be made up of 33% magnesium, 21% plastic, 18% steel, 6% aluminium with the other 22% consisting of multiple materials. The mass savings are 41%, a reduction from 143 kg to 84 kg.

Interior

The interior systems consist of the instrument panel, seats, soft and hard trim, carpeting, climate control hardware, audio, navigation and communication electronics, vehicle control elements and restraint systems. There is a high level of component integration and electronic interfaces replace mechanical controls on the low mass model. For the 2020 model the instrument panel is eliminated replaced by driver and passenger side modules containing all key functional and safety hardware. A low mass trim panel made from a high quality aerated plastic closes out the two modules. The air conditioning module is incorporated into the console eliminating the need for close out trim panels; heated and cooled cupholders are integrated into the HVA/C module. The audio/HVA/C/Navigation touch screen contains the shifter and parking brake functions and interfaces with small electric solenoids. This eliminates conventional steel parking brake and shifter controls and cables as well as freeing up interior space.

The front seats mount to the structural sill and tunnel structure eliminating conventional seat mounting brackets (10 kg) and the need to locally reinforce the floorpan. The composite front seat structure utilises proven foam technology; the seat mass is reduced by up to 50%. The rear seat support structure is moulded into the composite floorpan eliminating the need for a separate steel support structure. The front and rear seats use a knit to shape fabric that eliminates material scrap and offers customers the opportunity to order their favourite patterns for their new vehicle. Four removable carpet modules replace the traditional full floor carpeting; this reduces mass and allows cost effective upgrading of the carpet quality. The floorpan is grained in all visible areas. The 2017 production interior mass was reduced from 250 kg to 182 kg with projected cost savings of 3%. The 2020 production interior mass was 153 kg with projected cost savings of 4%.

Chassis/Suspension

The chassis and suspension system was composed of suspension support cradles, control links, springs, shock absorbers, bushings, stabilizer bars and links, steering knuckles, brakes, steering gearbox, bearings, hydraulic systems, wheels, tires, jack and steering column.

The chassis and suspension components were downsized based on the revised vehicle curb weight, maintaining the baseline carrying capacity and incorporating the mass of the hybrid drive system.

The total vehicle curb weight reduction for the 2020 vehicle was 38%, excluding the powertrain. Based on the gross vehicle weight, which includes retaining the baseline cargo capacity of 549 kg and utilising a hybrid powertrain, the chassis and the suspension components were reduced in mass by 43%, with projected cost savings of 5%.

Front and Rear Bumpers

The materials used on the front and rear bumpers were very similar to the existing model to maintain the current level of performance. One change was to replace the front steel beam with an aluminium beam which reduced mass by 11%. The use of a magnesium beam was analysed but at the current time exceeded the allowable price factor.

Heating, Ventilation and Air Conditioning

The air conditioning system was integrated into a passenger compartment system and an engine compartment system. This section addressed the under hood components which included the compressor, condenser and related plumbing. The under hood components were investigated for technologies and mass.

The study showed a relatively small mass difference for the underhood air conditioning components based on both vehicle mass and interior volume. Because of the highly evolved nature of these components, the requirements for equivalent air conditioning performance and the lack of a clear consensus for a future automotive refrigerant, the mass and cost of the Toyota Venza compressor, condenser and associated plumbing were left unchanged for both the 2017 and 2020 models.

Glazing

The glazing of the baseline vehicle was classified into two groups: fixed and moving. The fixed glass is bonded into position using industry standard adhesives and was classified into two sub groups: wiped and non wiped.

Factors involved in making decisions about glazing materials include the level of abrasion it is likely to see during the vehicle life, the legislative requirements for light transmissibility, the legislative requirements for passenger retention and the contribution it will make to interior noise abatement.

The specific gravity of glass is 2.6 and the thickness of a windshield is usually between 4.5 mm and 5 mm, therefore the mass per square metre of 5 mm glass is approximately 13 kgs. The high mass of glass provides a strong incentive to reduce the glazed area of the body, reduce the thickness of the glass and find a suitable substitute that is lighter. Fixed glass on the side of the vehicle offers the best opportunity for mass reduction.

The mass of the baseline glazing was retained for both the 2017 and 2020 models; this was a conservative approach. It is possible that coated polycarbonate materials may become mainstream in the 2017 – 2020 timeframe for fixed applications.

Electrical/Lighting

The estimated mass savings for using thinwall cladding and copper clad aluminium wiring, as used on the 2017 model was 36% versus the baseline model. The lighting technologies section reviewed included diodes, xenon and halogen. The study also reviewed a variety of wireless technologies under development for non-transportation applications that could be used in this time period pending successful development for mobile applications.

Lotus announced the 2010 Lotus Elise facelift price for its local market. When the brand new unit is going in the upcoming month on sale, it will have a price beginning at 26,550 GBP going up even to 34,500 GBP for SC – top of the range car.

The Elise revealed officially 1 month ago, it adopts the beautiful family design debuted by Evora (its sibling). It has a new bumper at the front, incorporating bigger intakes of air. It feature an all-new headlight design, with daytime LED running lights (that’s a premiere for Elise).

The facelift of Lotus Elise runs with either 1.8-liter engine or 1.6-liter engine having a supercharger. The strongest (expensive too) variant of the sportscar is SC the supercharged variant that makes 217 horsepower.

The Lotus Elise entry-level facelift produces 134 horsepower, 118 lbs-ft torque, sprinting from 0 to 60 in only 6.7 seconds. The auto has a maximum speed of 124 mph (200 km/h).

The 1.6-liter 134 hp engine, an unique displacement, never seen before on Elise, is emitting 155 grams CO2/km, 13 % reduction if you compared to the old unit. The 1.8-liter makes now 196 grams CO2/km.

All Elise cars get a close-ratio 6-speed gearbox. The facelifted variant of the Elise has alloy rims, all-new. The facelifted Lotus Elise features an aluminum, lightweight steel chassis plus a completely independent suspension system.

Lotus Evora 414E Hybrid

The 80th International Geneva Motor Show sees Lotus Engineering unveil the Lotus Evora 414E Hybrid concept, a high performance technology demonstrator with a plug-in series hybrid drive system and new technologies for enhanced driver involvement.

0-60 mph/97 kph in under 4 seconds
Total hybrid range of over 300 miles/483 kilometres
Eco mode or Sports mode featuring realistic 7 speed paddle shift with energy recuperation
HALOsonic Internal and External Electronic Sound Synthesis
Torque vectoring for improved dynamic stability
Integrated glass roof and engine cover and interior concept from Lotus Design
The Lotus Evora 414E Hybrid, so-named because this latest environmentally-focused technology demonstrator from Lotus Engineering produces 414 PS (306 kW) of power, promises breathtaking performance from a highly efficient propulsion system. The concept showcases new developments in plug-in, range-extended electric propulsion, new electronic technologies to enhance driver involvement, the adaptability of the Lotus Versatile Vehicle Architecture (VVA) that underpins the Evora 414E Hybrid and a dramatic new roof system and interior concept from Lotus Design. Through all of these aspects it ultimately demonstrates the exceptional ability of Lotus Engineering to integrate and develop advanced technologies for exciting, efficient, high performance niche vehicles.

The range extended electric drive of the Evora 414E Hybrid consists of two electric motors driving each of the rear wheels independently via single speed geartrain, integrated into a common transmission housing, thus enabling torque vectoring for stability control of the vehicle. Electrical power is stored in a lithium polymer battery pack optimised for energy density, efficiency and high power demand, mounted in the centre of the vehicle for stability and safety. Additional range is provided by the Lotus Range Extender engine, an optimised 1.2 litre, three-cylinder engine, designed specifically for series hybrid vehicles. The drivetrain is designed to combine astonishing performance with efficient, low emissions driving.

Driver involvement is enhanced by the incorporation of HALOsonic Internal and External Electronic Sound Synthesis technologies from Lotus and Harman International, which provide sound contouring within the cabin and improve pedestrian safety outside the vehicle. Integrated with the HALOsonic technology, the Evora 414E Hybrid also showcases a brand new technology from Lotus Engineering, a sports mode that simulates a 7 speed, paddle shift transmission that combines exceptional driver involvement for a hybrid sports car and optimised energy recuperation.

The Evora 414E Hybrid has been designed to highlight Lotus’ innovative electric and hybrid vehicle technology without distracting from the pure sportscar character of the Evora. The solution is innovative, instantly recognizable, beautiful and sporty. It demonstrates Lotus DNA.

Dr Robert Hentschel, Director of Lotus Engineering said: “Innovation has always been at the heart of Lotus and is needed now more than ever. The Evora 414E Hybrid is the perfect demonstration of Lotus Engineering’s core competencies: lightweight architectures, efficient performance, electrical and electronics integration and driving dynamics. The technology demonstrator represents an encapsulation of the advanced technologies that Lotus Engineering continues to develop to overcome the current environmental challenges facing the automotive industry and showcases the future direction that the sector is taking and why Lotus Engineering is perfectly placed to lead the technological development in this area.”

The Drivetrain
For the Lotus Evora 414E Hybrid, Lotus Engineering has developed a highly efficient, high performance drivetrain system consisting of twin motors each limited to providing 152 kW (207 PS/204 hp) of power and 400 Nm (295 lbft) of torque to each wheel via independent, single speed, reduction transmissions integrated into a single housing, enabling torque vectoring dynamic control of the vehicle.

The vehicle energy storage system is made up of the latest Lithium Polymer battery chemistry providing 17 kWH energy storage capacity. The battery pack is optimised for energy density, efficiency and high power demand, with over 100 kW discharge capability.

The Lotus Range Extender engine provides 35 kW (48 PS/47 hp) of power at 3,500 rpm via the integrated electrical generator and features an innovative architecture comprising an aluminium monoblock construction, integrating the cylinder block, cylinder head and exhaust manifold in one casting. This results in reduced engine mass, assembly costs, package size and improved emissions and engine durability. The engine uses an optimised two-valve, port-fuel injection combustion system to reduce cost and mass and can be operated on alcohol-based fuels and/or gasoline. The generator converts mechanical energy to electrical energy to replenish the battery pack charge and provides additional vehicle range in a small light weight package. The generator is also used as a motor to start the range extender engine. The low mass of the range extender unit (85 kg) and compact package makes it ideal for the series hybrid drivetrain in the Evora 414E Hybird.

All the operation and management of the range extender engine, the power management of the batteries and motor control are controlled by Lotus’ electronic control units and software systems. Full energy management of all the operating systems is the key to maximising performance and operation while minimising energy consumption and CO2 emissions.

For everyday commuting journeys, up to 35 miles can be travelled using battery power. The battery can be charged overnight using a conventional domestic mains supply through a socket concealed by the rear number plate. This permits the vehicle to operate with zero tailpipe emissions. For longer journeys, exceeding the battery capacity, the highly efficient range extender engine is used as a generator to supply the motor with electrical power and top up the battery.

Lotus has used its own vehicle simulation tools to determine the size, capacity, power and performance of all the components in the drivetrain system to optimise the system operation. Overall this is far more energy efficient, weight efficient and cost effective than fitting the vehicle with a larger and more expensive battery, which for the majority of short journeys is a redundant weight, which increases energy requirements. With regard to the total lifetime CO2 emissions of the vehicle, including the energy required to manufacture and run it, the range extender solution has a lower overall CO2 footprint than a fully electric car of comparable performance and operating range running with a larger battery.

The Package
The Lotus Evora 414E Hybrid structure is the same award-winning, versatile vehicle architecture used on the Lotus Evora. The low volume architecture was designed with the upmost flexibility in mind. The Evora 414E Hybrid is a perfect example of how to integrate a compact packaged drivetrain, with excellent performance and range, while using this underpinning. The complete chassis has remained unchanged from the Evora which maintains the structural integrity and strength performance of the original car.

The structure progresses the Lotus ‘bonded and riveted’ technology with new and unique extrusions and folded panels, whilst providing production build modularity and lower cost repairs. The chassis has been designed for scalability so that it can be extended in width, length and height. The strength and stiffness of the low volume VVA chassis can be modified cost effectively by varying the wall thickness of the extrusions, without altering the exterior dimensions. The ability to lengthen or shorten extrusions with the option to tailor the chassis stiffness vastly increases the number of vehicles that can be developed from this vehicle architecture.

Driving Dynamics
The Lotus Evora 414E Hybrid offers exhilarating, all-round dynamic performance and takes advantage of Lotus developed torque vectoring dynamics. Torque vectoring, which is the capacity to generate different torques at each of the driving wheels, is particularly suited to electric vehicles and significantly reduces the conflict between stability and response.

A key benefit of separate motors to drive each rear wheel individually is that this facilitates a much higher level of vehicle dynamics control. Driving the wheels with different levels of torque can not only generate all the capabilities of a conventional ESP system using energy regeneration as opposed to brake application, but it can also actively drive each wheel forward at different rates, producing a turning moment at the rear of the vehicle in addition to the steering input.

This can be used to enhance low speed manoeuvrability and ease of parking but can also be used to produce a much greater level of straight line high speed stability. Incorporating lateral sensors the system also provides stability control capabilities and levels of steering response normally only associated with heavy and expensive rear steer systems. This can provide automatic correction of both understeer and oversteer characteristics. In addition, the standard method to provide high speed stability of designing the rear wheels to toe-in is not required as the torque vectoring system automatically provides this stability control, with toe-in increasing rolling resistance, lowering fuel economy and increasing tyre wear. Lotus‘ long history of active suspension control provides the core capability to develop this technology and provides extraordinary driving pleasure on the Evora 414E Hybrid.

Driver Interaction
The Evora 414E Hybrid provides less of a psychological step change for people familiar with high performance cars compared to other electric and hybrid sports cars. The car has a simulated paddle shift gear change offering ultra quick gear changes reminiscent of a dual clutch transmission, while actually single speed. This enhances the driver interaction with the vehicle and provides a driving experience similar to current internal combustion engine high performance sports cars. The Evora 414E Hybrid uses a column mounted paddle shift to simulate the gear change and a synthesised engine sound changes frequency with virtual gear selection. The drive torque is also modulated to simulate a physical feeling of a gearshift jolt.

The virtual gearshift simulation, like a conventional gearbox, is used to change the driving characteristics and response of the vehicle. The most significant aspect that this offers the driver is the ability to control the vehicle deceleration by simulating engine braking through a virtual downshift in gears. Unlike true engine braking, the Lotus system does not dissipate the energy of the moving vehicle through internal engine friction but uses the electric motors to regenerate the energy back into the battery. While many electric and hybrid vehicles provide engine braking, this is generally at a fixed rate or preselected rate. In some driving situations this can either be too aggressive, slowing the vehicle unnecessarily, or too light, requiring additional braking application. The Lotus system effectively allows the driver to select the appropriate level of regeneration by simulating stepping down by one, two or even three gears. The simulation of engine braking through both the gear noise change and the retardation of the vehicle is fully intuitive to a driver familiar with a conventional gearbox. The simulated gearchange capability can be selected for greater driving involvement or switched off for more relaxed driving.

The Evora 414E Hybrid uses the Lotus Engineering and Harman International developed HALOsonic suite of noise solutions. The first of which is Electronic Sound Synthesis. This generates engine sounds inside the vehicle through the audio system where it provides an exciting sports sound in line with the brand and nature of the vehicle together with a high level of driver feedback in an intuitive manner. In addition, it also generates sound on the outside of the vehicle through speakers mounted at the front and rear to provide a warning to increase pedestrian safety, which is especially important for electric and hybrid vehicles which can be difficult to hear at slower speeds.

There are four driver selectable engine sounds currently on the vehicle, two of which have been designed to have characteristics of a multi-cylinder conventional V6 and V12 engine. There is also a futuristic sound and a combination of a conventional engine and a futuristic sound, enhancing the brand identity of the vehicle as a step forward in electric vehicle design.

The addition of this Lotus patented simulated gearshift concept not only provides for an exciting and involving driving experience that customers would expect from a Lotus, but also enhances the driver’s control of the vehicle while providing the capability for more efficient operation through a greater use of energy regeneration.

The Design
The distinctive colour scheme and ‘floating’ roof have been carefully designed to accent the cars electric vehicle technology whilst complementing the iconic lines of the Evora.

Copper, a colour often associated with electrical systems, has been chosen for the car’s exterior and interior. A contemporary satin finish paint is complemented by electrical circuit inspired graphics that highlight the car’s key feature lines and the unique glazed roof panel. The newly extended glazed zone integrates seamlessly with the existing forms of the Evora whilst showcasing the key components behind the hybrid and electric vehicle technology.

The signature copper theme is consistently carried throughout the car from the dramatic seat stripes and instrument panel inserts to the copper callipers that nestle behind the carbon grey forged wheels. Inside the cabin a sense of quality and richness has been created by carefully juxtaposing the different tactile qualities intrinsic to leather, Alcantara and metal.